Olivia Carter
Changing the door round on your Beko fridge freezer may seem like a daunting task, but with a little patience and careful attention to detail, it can be easily accomplished. Whether you’re moving your fridge freezer to a new location or simply prefer the door to open on a different side, this article will guide you through the process step by step.
Before you begin, make sure you have all the necessary tools and equipment. You will need a screwdriver, a socket wrench, and possibly a drill. It’s also a good idea to have a helper to assist you with lifting and holding the door.
The first step is to empty the contents of your fridge freezer and unplug it from the power source. This will ensure that you have a clear workspace and prevent any accidents. Next, remove any shelves or drawers from the door or interior of the fridge freezer.
Using a screwdriver, remove the screws holding the hinges in place. Take note of where the hinges are positioned, as you will need to reattach them in the opposite direction. Carefully lift the door off the hinges and set it aside. It’s a good idea to place the door on a soft surface to prevent any damage.
Now it’s time to reattach the hinges. If the opposite side of the fridge freezer already has pre-drilled holes for the hinges, you can simply screw them back in place. If not, you may need to use a drill to create new holes. Make sure the hinges are securely fastened and that the door opens smoothly.
Finally, reassemble the interior of the fridge freezer and plug it back into the power source. Check that the door seals properly and make any necessary adjustments. Congratulations, you have successfully changed the door round on your Beko fridge freezer!
Remember to always refer to the manufacturer’s instructions and consult a professional if you have any doubts or concerns. With a little effort, you can easily customize your fridge freezer to meet your specific needs.
Overview of the Door Round on Beko Fridge Freezer
The door round on a Beko fridge freezer is an essential component of the appliance. It plays a crucial role in maintaining the desired temperature inside the fridge and freezer compartments while providing easy access to the stored items.
The door round is made of durable materials to withstand frequent opening and closing, as well as the weight of the door itself. Over time, however, the door round may experience wear and tear, which can affect its performance. If you notice any issues with the door round, such as leaks, difficulty in opening or closing, or a loose seal, it is important to address them promptly to ensure the optimal functioning of your fridge freezer.
Signs of a Faulty Door Round
There are several signs that may indicate a faulty door round on your Beko fridge freezer:
- Leaking water or condensation around the door
- Difficulty in opening or closing the door
- A loose or damaged seal
- Noise coming from the door hinges
- The door not aligning properly with the unit
Steps to Change the Door Round on Beko Fridge Freezer
If you need to change the door round on your Beko fridge freezer, follow these steps:
- Unplug the fridge freezer from the power source.
- Open the door and remove any items stored inside.
- Locate the screws that secure the door round to the fridge freezer. These screws are usually located on the inner side of the door.
- Use a screwdriver to unscrew and remove the screws.
- Gently lift the old door round off the door and set it aside.
- Take the new door round and align it with the door hinges.
- Secure the new door round in place by tightening the screws.
- Plug the fridge freezer back into the power source.
It is important to follow the manufacturer’s instructions when changing the door round on your Beko fridge freezer. If you are unsure or need assistance, it is recommended to consult a professional technician or contact Beko customer support for guidance.
Preparation
In order to change the door round on your Beko fridge freezer, you will need to gather the necessary tools and materials and prepare the area for the task. Here are the steps you should follow to ensure a smooth and successful door round replacement:
- Make sure to unplug the fridge freezer from the power source to avoid any electrical hazards.
- Empty the contents of the fridge and freezer to make it easier to handle and work with the appliance.
- Find a clean and well-lit area with enough space to comfortably work on the fridge freezer.
- Prepare a clean and soft surface, such as a blanket or cardboard, to lay the fridge freezer on during the door round replacement.
- Gather the necessary tools and materials, which may include a screwdriver, pliers, and a replacement door round.
By following these preparation steps, you will create an optimal environment for changing the door round on your Beko fridge freezer. This will help ensure safety and efficiency throughout the process.
Gathering the necessary tools
Before you begin changing the door handle on your Beko fridge freezer, you will need to gather the necessary tools. Having the right tools on hand will make the process much smoother and ensure that you can properly install the new door handle.
Here are some tools you will need:
- Phillips head screwdriver
- Flathead screwdriver
- Allen wrench set
- Tape measure
Make sure you have these tools readily available before you start the process. It is also a good idea to wear protective gloves to prevent any injuries while handling the tools or working on the door.
Ensuring safety measures
When changing the door round on your Beko fridge freezer, it is important to follow certain safety measures to avoid any accidents or damage.
Here are some key safety tips to keep in mind:
1. Turn off the power: Before starting the door reversal process, make sure to unplug the fridge freezer from the power outlet to avoid any electrical shocks.
2. Empty the contents: Remove all the items from your fridge freezer, including food, shelves, and drawers. This will make the process easier and reduce the risk of items falling or getting damaged during the door reversal.
3. Use proper tools: Ensure that you have the correct tools, such as a screwdriver and a helper to assist you in the process. Using the wrong tools can damage the door or cause injury.
4. Follow the manufacturer’s instructions: Read the user manual or instructions provided by the manufacturer carefully before attempting to change the door round. Each fridge freezer model may have specific instructions and recommendations that need to be followed.
5. Work in a well-lit area: Make sure to work in a well-lit area to clearly see what you are doing. Poor lighting can lead to accidents or mistakes in the door reversal process.
6. Take your time: Do not rush the door reversal process. Take your time to ensure that each step is done correctly and securely. Rushing can lead to errors or damage to the fridge freezer.
7. Stay safe: Wear protective gloves to avoid any injuries while handling sharp objects or heavy doors. Also, be mindful of your back and avoid lifting or carrying heavy items on your own.
By following these safety measures, you can change the door round on your Beko fridge freezer without any mishaps or accidents. Remember, if you are unsure about any step or uncomfortable with the process, it is always best to seek assistance from a professional technician.
Step-by-step Guide
Changing the door round on your Beko fridge freezer can be a simple process if you follow these steps:
- Start by switching off the fridge freezer and unplugging it from the power source for safety.
- Open the fridge and remove all items from the door shelves to make the door lighter and easier to handle.
- Locate the top and bottom hinge covers on the side of the fridge door and gently pry them off using a flat-head screwdriver.
- Once the covers are removed, use a suitable tool, such as a spanner or screwdriver, to loosen the screws holding the hinges in place.
- With the screws loosened, carefully lift the door off the hinges and set it aside in a safe place.
- If you want to change the side the door opens on, remove the plastic plugs from the opposite side of the fridge and insert them into the holes left by the hinges.
- Take the new door and position it on the hinges, making sure it aligns properly.
- Tighten the screws on the hinges to secure the new door in place.
- Replace the hinge covers by snapping them back into position.
- Plug in the fridge freezer and switch it on. Your Beko fridge freezer should now have a new door that opens on the desired side.
It is important to read and follow the manufacturer’s instructions provided with your specific model of Beko fridge freezer to ensure a safe and successful door round change.
Step 1: Removing contents from the freezer
Before starting the process of changing the door round on your Beko fridge freezer, it is important to remove all the contents from the freezer compartment. This will ensure that the items are not damaged or spoiled during the door removal process.
To remove the contents, follow these steps:
- Open the freezer compartment door.
- Take out any food items, ice trays, or ice packs that are stored in the freezer.
- Place the food items in a cooler or another suitable container to keep them chilled while you work on changing the door round.
- Ensure that the freezer compartment is empty before proceeding to the next step.
By removing the contents from the freezer, you can safely and easily work on changing the door round without any obstructions or potential damage to the items inside.
Step 2: Defrosting the freezer
Before attempting to change the door round on your Beko fridge freezer, it is important to defrost the freezer first. This is necessary to prevent any ice build-up from obstructing the door removal process.
Follow these steps to defrost your freezer:
- Unplug the fridge freezer from the power source to ensure your safety.
- Remove all food and perishable items from the freezer and place them in a cooler or insulated bags to keep them frozen.
- Leave the freezer door open to allow the ice to melt naturally. You can place towels or absorbent materials around the freezer to collect any water drips.
- Avoid using sharp objects to remove the ice as they can damage the freezer interior. Instead, use a plastic scraper or a spatula to gently remove the ice buildup.
- Once all the ice has melted and the freezer is completely defrosted, wipe the interior walls and shelves with a clean, damp cloth to remove any remaining moisture.
- Finally, leave the freezer door open for a short while to allow any excess moisture to evaporate before proceeding to the next step of changing the door round.
Defrosting the freezer is a crucial step as it ensures a smooth door removal process and minimizes the risk of damaging the appliance. Make sure to follow all safety guidelines and wait until the freezer is completely defrosted before moving on to the next step.
Step 3: Removing the old door round
Before you can install the new door round on your Beko fridge freezer, you first need to remove the old one. Follow the steps below to remove the old door round:
Materials Needed
- Phillips screwdriver
- Flat-head screwdriver
- Towel or soft cloth
Instructions
- Start by unplugging your Beko fridge freezer from the power source.
- Open the fridge freezer door and locate the screws that secure the door round in place. These screws are typically located around the edges of the door round.
- Using a Phillips screwdriver, carefully unscrew these screws and set them aside in a safe place. Be careful not to drop them or lose them.
- Once all the screws are removed, gently pry the old door round away from the fridge freezer using a flat-head screwdriver. Take your time and be gentle to avoid damaging the fridge freezer or the door round.
- As you remove the old door round, be mindful of any wiring or connectors that may be attached to it. Disconnect any wires or connectors as needed.
- Place a towel or soft cloth on a flat surface and carefully lay the old door round on it. This will protect the door round from scratches or other damage.
Now that you have successfully removed the old door round, you are ready to proceed to the next step: installing the new door round on your Beko fridge freezer.
Step 4: Installing the new door round
Now that you have removed the old door round, it’s time to install the new one. Follow these steps to ensure proper installation:
- Carefully align the new door round with the holes on the fridge freezer door.
- Insert the screws provided into the holes and tighten them using a screwdriver. Make sure the door round is securely fastened to the door.
- If there are any additional accessories or parts that need to be installed, refer to the manufacturer’s instructions and install them accordingly.
- Ensure that the door round is properly aligned and level. Adjust if necessary.
- Double-check that all screws are tightened and the door round is firmly attached to the door.
Once you have completed these steps, the new door round should be securely installed on your Beko fridge freezer. Test the door to make sure it opens and closes smoothly. If everything looks and works properly, congratulations! You have successfully changed the door round on your Beko fridge freezer.
Tips and Tricks
Changing the door round on your Beko fridge freezer may seem like a daunting task, but with the right tips and tricks, you can easily accomplish it. Here are some useful tips to help you:
1. Gather the necessary tools: Before you begin, make sure you have all the tools you need, including a screwdriver, pliers, and a socket set. Having these tools on hand will make the process much smoother.
2. Read the manual: It’s always a good idea to read the manual that came with your Beko fridge freezer. This will provide you with specific instructions for changing the door round and any additional tips or precautions you should be aware of.
3. Take pictures: Before you start disassembling the door, take pictures of the current setup. This will serve as a visual reference to help you put everything back together correctly.
4. Remove the door handles: Use a screwdriver or a socket set to remove the screws holding the door handles in place. This will allow you to remove the handles and access the hinge screws.
5. Remove the door: With the handles removed, you can now remove the door from the fridge freezer. Carefully lift the door up and away, making sure to support it with your other hand to avoid any accidents.
6. Change the hinges: Once the door is removed, you can change the hinges to the opposite side. Use a screwdriver or pliers to remove the hinge screws and swap the hinges to the desired side.
7. Reattach the door: After changing the hinges, carefully reattach the door to the fridge freezer. Make sure to align the hinges with the corresponding holes and secure them with the screws.
8. Reattach the door handles: Lastly, reattach the door handles to their new positions. Use the screws you removed earlier to secure the handles in place.
Following these tips and tricks will make the process of changing the door round on your Beko fridge freezer much easier. Remember to take your time and be careful when handling the door and its components. If you’re unsure at any point, consult the manual or seek assistance from a professional.
FAQ
Can I change the door round on my Beko fridge freezer?
Yes, you can change the door round on your Beko fridge freezer. It is a relatively simple process that can be done with a few basic tools. Here’s how you can do it:
