Olivia Carter
If you own a Frigidaire refrigerator, you may have encountered the need to remove the freezer drawer at some point. Whether it was for cleaning, organizing, or repairing, taking out the freezer drawer can be quite easy. However, putting it back in place can sometimes be a little challenging, especially if you are not familiar with the correct procedure.
Putting the freezer drawer back in your Frigidaire refrigerator is crucial to maintaining its functionality and ensuring that your frozen foods stay properly preserved. Fortunately, with a few simple steps, you can easily reinsert the freezer drawer and have your refrigerator back to its fully functional state in no time.
To begin, make sure the freezer drawer and the surrounding area are clean and free from any debris that may hinder the reinsertion process. Take a moment to inspect the freezer drawer, checking for any damage or misalignment that may have occurred during its removal. If you notice any issues, it is essential to address them before attempting to put the freezer drawer back.
Next, carefully align the freezer drawer with the tracks inside the Frigidaire refrigerator. The freezer drawer should fit snugly into place, with the front of the drawer aligned with the front of the refrigerator. Push the drawer inwards, using gentle pressure, until it slides fully into position. You may hear a clicking sound or feel a slight resistance as the drawer locks into place. Once securely inserted, give the freezer drawer a gentle tug to ensure it is properly seated in the tracks.
Finally, take a moment to double-check that the freezer drawer is functioning correctly. Open and close the drawer a few times to ensure it glides smoothly along the tracks without any obstructions. If you encounter any issues or notice any unusual noises, it may be necessary to repeat the process or seek further assistance from a professional technician.
By following these steps, you can confidently put the freezer drawer back in your Frigidaire refrigerator and restore its functionality. Properly reinserting the drawer will not only ensure that your frozen foods remain frozen but also prevent any potential damage to the refrigerator itself. With a little patience and attention to detail, you can easily complete this task and have your Frigidaire refrigerator back to its optimal performance.
How to Reinstall Freezer Drawer in Frigidaire
Putting the freezer drawer back in your Frigidaire refrigerator is a fairly simple process that can be completed in a few easy steps. This guide will walk you through the process to ensure a smooth reinstallation.
Before You Begin
Before starting the reinstallation process, make sure you have the following tools ready:
- Philips head screwdriver
- Clean cloth or sponge
Step 1: Remove Any Food or Items
Clear out the freezer drawer and remove any food or items stored inside. This will make it easier to reinstall the drawer.
Step 2: Remove the Drawer Slides
Locate the screws securing the drawer slides to the freezer walls. Use a Philips head screwdriver to remove these screws and detach the slides from the walls. Set the screws aside in a safe place, as you will need them for reinstallation.
Step 3: Clean the Drawer Slides
Take a clean cloth or sponge and wipe down the drawer slides to remove any dirt or debris. This will help ensure a smooth sliding motion once the drawer is reinstalled.
Step 4: Insert the Drawer Slides
Align the drawer slides with the corresponding slots on the freezer walls. Insert the slides into the slots and make sure they are securely attached. Use the screwdriver to reattach the screws and tighten them as needed.
Step 5: Test the Sliding Motion
Slide the freezer drawer back and forth a few times to ensure it moves smoothly on the slides. Adjust the screws if necessary to improve the sliding motion.
Step 6: Reinstall Food and Items
Once you are satisfied with the sliding motion of the drawer, you can put the food and items back into the freezer. Ensure everything is properly organized and arranged for easy access.
Conclusion
Reinstalling the freezer drawer in your Frigidaire refrigerator is a quick and easy process that can be done in a few simple steps. By following this guide, you can ensure a proper reinstallation and enjoy a smoothly functioning freezer.
Step 1: Preparing for Installation
Before you begin putting the freezer drawer back into your Frigidaire appliance, it’s important to make sure you have all the necessary tools and materials. This will ensure a smooth and successful installation process.
1. Gather your tools and materials
Make sure you have the following tools on hand:
- Phillips screwdriver
- Flashlight
- Tape measure
In addition, you may need the following materials:
- Dust mask
- Gloves
- Replacement screws (if needed)
2. Clear the area
Before you begin, clear the area around your appliance to give yourself plenty of room to work. Remove any items or obstacles that may be in the way.
3. Turn off the power
For safety reasons, it is essential to turn off the power to your Frigidaire appliance. Locate the circuit breaker or unplug the appliance from the electrical outlet. This will prevent any accidental electrical shocks during the installation process.
![[2 PACK] 240337103 Refrigerator Crisper Drawer Replacement Compatible with Frigidaire Kenmore Refrigerator Drawer Replacement, Frigidaire Drawer Replacement for AP2115741, 240337100, 240337102](https://m.media-amazon.com/images/I/31oUopsqLIL._SS520_.jpg)
4. Wear protective gear
To protect yourself from any potential hazards, put on a dust mask and gloves before you start working. This will help prevent any dust or debris from getting into your respiratory system or causing harm to your hands.
By following these steps and taking the necessary precautions, you will be ready to proceed with putting the freezer drawer back into your Frigidaire appliance.
Step 2: Removing the Freezer Drawer
Removing the freezer drawer from your Frigidaire refrigerator may seem challenging, but with the right steps, it can be done easily.
Follow these instructions to remove the freezer drawer:
| 1. | Open the freezer door fully to access the drawer. |
| 2. | Locate the release tabs on both sides of the freezer drawer. |
| 3. | Press the release tabs simultaneously to disengage the drawer from the slides. |
| 4. | Gently pull the drawer towards you until it comes completely out of the freezer. |
| 5. | Set the drawer aside in a safe location to prevent any damage. |
That’s it! You have successfully removed the freezer drawer from your Frigidaire refrigerator. Keep the drawer in a secure place until you are ready to put it back in.
Now, let’s move on to the next step, which is putting the freezer drawer back in your Frigidaire refrigerator.
Step 3: Aligning the Drawer Tracks
Once the freezer drawer is fully inserted into the freezer compartment, you will need to align the drawer tracks to ensure smooth operation. Follow these steps:
1. Open the freezer drawer
Gently pull the freezer drawer towards you until it is fully extended and open.
2. Align the tracks
Take a close look at the tracks on the sides of the freezer compartment. Locate the corresponding tracks on the sides of the freezer drawer. Slowly push the drawer back into the freezer compartment, making sure that the tracks on the drawer align with the tracks on the compartment.
If you encounter any resistance or difficulty in aligning the tracks, make sure there are no obstructions or debris in the way. Clean the tracks if necessary.
Continue pushing the drawer back until it is fully closed.
3. Test the movement
After aligning the tracks, test the movement of the drawer by opening and closing it a few times. The drawer should slide smoothly along the tracks without any obstruction.
If you still experience any issues with the movement of the drawer, it is recommended to consult the Frigidaire user manual or contact Frigidaire customer support for further assistance.
Step 4: Sliding the Drawer Back In
Once you have cleaned the freezer drawer and all the components, you are ready to slide the drawer back into its place in the Frigidaire refrigerator.
Carefully align the rails on the sides of the drawer with the grooves in the freezer compartment. Make sure the drawer is level and straight before proceeding.
Gently push the drawer back into the freezer compartment, making sure it glides smoothly along the rails. Take your time and be cautious not to force the drawer or damage any components.
Once the drawer is fully slid back in, give it a gentle tug to ensure it is securely in place. It should not feel loose or wobbly.
Finally, close the freezer door to complete the process. Double-check that the drawer is properly aligned and sealed when the door is closed.
If you encounter any difficulties or if the drawer does not slide in correctly, check for any obstructions or misalignments. Make any necessary adjustments and try again.
That’s it! You have successfully put the freezer drawer back in your Frigidaire refrigerator.
Step 5: Checking the Drawer’s Fit
Once you have properly aligned the drawer runners with the slots on either side of the freezer compartment, you will need to check the fit of the drawer to ensure that it slides in smoothly and can be fully closed. Follow these steps to check the fit:
- Push the drawer into the freezer compartment, making sure that it is aligned with the runners.
- Gently slide the drawer back and forth to test its movement. It should glide smoothly along the runners without any resistance.
- Check all sides of the drawer to ensure that it is sitting flush against the compartment walls. There should not be any gaps or misalignments.
- Carefully close the drawer and ensure that it fully closes without any obstructions.
Adjusting the Drawer
If you find that the drawer is not fitting properly, there are a few adjustments you can make:
- If the drawer is not sliding smoothly, remove it from the freezer and inspect the runners for any debris or obstructions. Clean the runners thoroughly and try sliding the drawer back in.
- If the drawer is misaligned or not sitting flush against the compartment walls, double-check that the runners are properly aligned with the slots. Remove the drawer and try reinserting it, ensuring that it is aligned correctly.
- If the drawer still does not fit properly after making these adjustments, you may need to contact Frigidaire customer service for further assistance.
Final Checks
Once you are satisfied with the fit and movement of the drawer, double-check that it closes securely and does not pop open when the freezer door is closed. Additionally, test the drawer’s functionality by opening and closing it several times to ensure that it operates smoothly.
By following these steps and performing the necessary checks, you should be able to successfully put the freezer drawer back in your Frigidaire appliance.
Step 6: Securing the Drawer in Place
Once the freezer drawer is aligned correctly with the tracks, you can secure it in place to ensure it doesn’t slide out unintentionally.
- Locate the metal brackets on both sides of the freezer compartment.
- Slide the metal brackets into the slots on the sides of the freezer drawer.
- Make sure the brackets engage fully and securely in the slots.
- Push the drawer all the way in until it is flush with the front of the freezer.
- Open and close the drawer a few times to confirm that it glides smoothly along the tracks without any resistance.
By securing the drawer properly, you can prevent it from accidentally opening or falling out, ensuring the safety of your food items as well as the longevity of your Frigidaire freezer.
FAQ
What do I do if the freezer drawer in my Frigidaire refrigerator is not fitting properly?
If the freezer drawer in your Frigidaire refrigerator is not fitting properly, you can try a few things to resolve the issue. First, make sure that the drawer is not overloaded with items, as this can cause it to not close properly. If that doesn’t solve the problem, check the rails on which the drawer slides to see if anything is blocking them. Clear any obstructions and try closing the drawer again. If the problem persists, it may be necessary to adjust the rails or contact a professional for assistance.
How do I remove the freezer drawer from my Frigidaire refrigerator?
To remove the freezer drawer from your Frigidaire refrigerator, start by opening the drawer fully. On each side of the drawer, you will find a release lever. Push both levers down simultaneously while gently pulling the drawer towards you. Once the levers are fully depressed, continue pulling the drawer towards you until it comes completely free from the rails. Be careful not to force the drawer out, as this may cause damage to the rails or the drawer itself.
What should I do if the freezer drawer falls off the rails?
If the freezer drawer in your Frigidaire refrigerator falls off the rails, you will need to put it back on. Start by opening the door fully and examining the rails to see if anything is obstructing them. Remove any obstructions and then carefully align the drawer with the rails. Slide the drawer back onto the rails, making sure that it is sitting securely. Once the drawer is back in place, test it by opening and closing it to ensure that it is functioning correctly.
Is it necessary to remove the food from the freezer drawer before putting it back in the Frigidaire refrigerator?
If you need to put the freezer drawer back in your Frigidaire refrigerator, it is not necessary to remove the food from the drawer. However, it is a good idea to make sure that the drawer is not overloaded with items, as this can cause it to not fit properly. If the drawer is too full, consider removing some items to ensure a proper fit. It is also important to be cautious when handling the drawer to avoid damaging the food or causing any accidents.
Can I adjust the rails of the freezer drawer in my Frigidaire refrigerator myself?
Yes, you can adjust the rails of the freezer drawer in your Frigidaire refrigerator yourself. Start by removing the freezer drawer following the instructions in the user manual. Once the drawer is removed, you will be able to access the rails. Look for any screws or bolts that can be loosened to adjust the position of the rails. Make the necessary adjustments and then tighten the screws or bolts back. Test the drawer to ensure that it is sliding smoothly on the rails. If you are unsure about making adjustments, it is recommended to consult the user manual or contact a professional for guidance.
