Olivia Carter
If you own a Hoover fridge freezer and need to change the side on which the doors open, this guide will provide you with step-by-step instructions on how to do it.
Changing the doors opening direction on a Hoover fridge freezer is not a difficult task, but it does require some time and patience. By following these instructions carefully, you will be able to successfully reverse the doors opening direction and customize the appliance to suit your needs.
Step 1: Start by unplugging your Hoover fridge freezer from the power outlet to ensure your safety during the process. Moving on, empty the freezer compartment and remove any items stored in the fridge section. This will make it easier to handle the appliance during the door reversal.
Step 2: Next, locate the hinges on the fridge freezer. You will find them on the opposite side of the doors. Use a screwdriver to remove the screws securing the hinges. Keep the screws in a safe place, as you will need them later.
Step 3: Once the screws are removed, carefully lift the doors out of the hinges. You may need an extra pair of hands to do this, as the doors can be heavy. Be mindful not to damage the doors or the appliance during the removal process.
Step 4: With the doors removed, place them on a soft and clean surface to avoid any scratches. Take the time to clean the surface of the fridge freezer and remove any dirt or debris.
Step 5: Now, it’s time to prepare the doors for reinstallation. Remove the hinge covers on the opposite side of the doors and insert them into the original hinge locations. Make sure they fit securely and line up correctly with the holes.
Step 6: Carefully insert the doors back into the hinges, making sure they are aligned correctly. Use the screws you removed earlier to secure the hinges and tighten them firmly.
Step 7: Finally, plug your Hoover fridge freezer back into the power outlet and allow it to cool down for a few hours before placing any items inside. This will ensure that the appliance functions properly after the door reversal.
By following these simple steps, you can change the doors opening direction on your Hoover fridge freezer and customize it to fit your kitchen layout and preferences. Just remember to take your time and handle the appliance with care throughout the process.
Step-by-step Guide to Changing Doors Opening on Hoover Fridge Freezer
If you need to change the opening direction of the doors on your Hoover fridge freezer, follow these step-by-step instructions to do it easily and safely:
Step 1: Firstly, unplug the fridge freezer from the power supply to ensure your safety. It is essential to work on the appliance only when it is disconnected.
Step 2: Empty the fridge freezer and remove all the food items from both compartments. Store perishable foods in a cooler with ice packs to keep them fresh during the process.
Step 3: Remove any adjustable shelves, drawers, and door bins from the fridge and freezer compartments. Take note of their positions, as you will need to put them back correctly later.
Step 4: Locate the hinge covers on the refrigerator door and freezer door. These covers will most likely be at the top of the doors. Use a small flat-head screwdriver to gently pry them off.
Step 5: Once the hinge covers are removed, you will see the hinges. Use a screwdriver to unscrew the hinges and lift the doors off the appliance. Be careful as the doors may be heavy.
Step 6: Once the doors are removed, locate the small plugs in the opposite sides of the fridge and freezer compartments. These plugs cover the screw holes for the hinges. Remove these plugs using a flat-head screwdriver.
Step 7: Take the doors and reattach them to the opposite sides of the fridge and freezer compartments. Ensure that the doors are properly aligned and the screw holes are matched up.
Step 8: Use a screwdriver to attach the hinges back onto the doors and tighten the screws. Make sure they are secured tightly to ensure the doors function properly.
Step 9: Replace the hinge covers by snapping them back into place. Ensure they are securely fitted to provide a clean and finished look.
Step 10: Put back all the adjustable shelves, drawers, and door bins into their original positions. Double-check their alignment and make any necessary adjustments if needed.
Step 11: Plug the fridge freezer back into the power supply and allow it to run for a few minutes to ensure everything is working correctly.
Step 12: Finally, put back the food items into the fridge and freezer compartments, and you’re done! Your Hoover fridge freezer’s doors are now opening in the desired direction.
By following these simple steps, you can easily change the doors’ opening direction on your Hoover fridge freezer. Make sure to take all necessary precautions, and if you’re unsure, it’s always best to consult the appliance’s user manual or contact a professional for assistance.
Preparation and Tools
Before you begin changing the doors opening on your Hoover fridge freezer, it’s important to gather all the necessary tools and prepare the space properly. This will ensure that the process goes smoothly and efficiently. Here are the steps and tools you will need:
1. Empty the Fridge Freezer: Remove all food items from the fridge and freezer compartments to avoid any spills or damage during the door opening process. This will also make the fridge freezer lighter and easier to handle.
2. Switch Off and Unplug: Make sure the fridge freezer is switched off and unplugged from the power source. This is crucial for your safety during the door changing process.
3. Protect the Floor: Place a protective covering, such as an old towel or cardboard, on the floor in front of the fridge freezer. This will prevent any scratches or damage to the floor surface.
4. Gather the Tools: Here are the tools you will need for this task:
- A screwdriver (both flathead and Phillips-head)
- An adjustable wrench or pliers
- A measuring tape
- A level
- Plastic gloves (optional)
5. Read the Instruction Manual: It’s always a good idea to consult the instruction manual provided by Hoover for your specific fridge freezer model. This will give you detailed guidance and ensure you follow the manufacturer’s recommended procedures.
Once you have gathered all the necessary tools and prepared the space, you’re ready to proceed with changing the doors opening on your Hoover fridge freezer.
Removing the Old Door
Before you can change the way your Hoover fridge freezer doors open, you’ll need to remove the old door. Follow these steps to safely remove the door:
- Start by unplugging the fridge freezer from the power source. This will prevent any accidents from occurring while you are working.
- Empty the contents of the old door, making sure to take out all food and other items stored in the door compartments.
- Locate the hinges that hold the door in place. Depending on the model of your Hoover fridge freezer, these hinges may be located at the top or bottom of the door.
- Using a screwdriver or a wrench, carefully unscrew the bolts or screws that secure the hinges to the fridge freezer. Keep the screws or bolts in a safe place, as you will need them later when installing the new door.
- Gently lift the old door off the hinges, making sure to support its weight as you do so. Doors can be heavy, so it may be helpful to have another person assist you with this step.
- Once the old door has been removed, place it in a safe and clean area to prevent any damage.
Now that you have successfully removed the old door, you can proceed with installing the new door and changing the way it opens on your Hoover fridge freezer. Refer to the manufacturer’s instructions for the specific steps to follow for your model.
Reversing the Hinges
Reversing the hinges on your Hoover fridge freezer can change the direction in which the door opens. This can be helpful if you need to reposition your fridge freezer or if the door is currently opening in the wrong direction for your kitchen layout.
Before you begin
Before you start reversing the hinges, make sure to unplug the fridge freezer from the power source. This will ensure your safety throughout the process. It’s also a good idea to empty the contents of the fridge and freezer to make it easier to work with.
Materials you will need
- Phillips screwdriver
- Flathead screwdriver
- Masking tape
Step-by-step instructions
- Open the fridge freezer door and locate the hinge cover on the top edge of the door.
- Use a flathead screwdriver to carefully pry off the hinge cover.
- Once the cover is removed, you will see the screws holding the hinge in place. Use a Phillips screwdriver to unscrew these screws.
- With the screws removed, lift the door off the fridge freezer and set it aside.
- Next, remove the screws from the other side of the fridge freezer where the door will be mounted.
- Take the door and position it on the opposite side of the fridge freezer, lining up the holes with the screw openings.
- Insert and tighten the screws to secure the door in place.
- Replace the hinge cover by snapping it back into position.
- Plug the fridge freezer back into the power source and make sure it is working properly.
By following these simple steps, you can easily reverse the hinges on your Hoover fridge freezer to change the direction in which the door opens. This can improve the functionality and convenience of your appliance in your kitchen space.
Attaching the New Door
Once you have removed the old door from your Hoover fridge freezer, you can proceed with attaching the new door. Follow the steps below to ensure a proper and secure installation.
- Place the new door face down on a clean and soft surface to avoid scratching the surface.
- Remove the protective covering from the hinges on the refrigerator body.
- Align the holes on the hinge brackets of the new door with the holes on the refrigerator body.
- Once aligned, insert the screws provided with the new door through the holes and tighten them with a screwdriver. Make sure the screws are securely fastened.
- Repeat the above steps for the lower hinge brackets of the new door.
- Double-check that the new door is properly aligned and level with the refrigerator body.
- If necessary, adjust the door by loosening the screws slightly and repositioning it until it is level and aligned.
- Tighten the screws again once the door is properly aligned.
- Once you are satisfied with the alignment and attachment of the new door, remove any protective covering or film from the surface of the door.
With the new door securely attached, you can now enjoy the aesthetic improvement and functionality of your Hoover fridge freezer.
FAQ
Can I change the doors opening on my Hoover fridge freezer myself?
Yes, you can change the doors opening on your Hoover fridge freezer yourself. However, it is important to follow the manufacturer’s instructions and take necessary precautions to avoid any damage or injury. If you are not comfortable with DIY tasks or unsure about the process, it is recommended to seek professional assistance.
Do I need to defrost my Hoover fridge freezer before changing the doors opening?
No, you do not need to defrost your Hoover fridge freezer before changing the doors opening. However, it is recommended to empty out the contents of the fridge and freezer to make it easier to work with. If there is any ice buildup, you can use a hairdryer on a low heat setting to melt it away before starting the door removal process.
