Free Shipping on orders over US$39.99 +16308230407

How Do You Change A Kitchen Mixer Tap

If you find yourself with a leaky kitchen mixer tap or you simply want to update the look of your kitchen, changing the tap can be a simple, yet effective solution. While it may seem like a daunting task, with the right tools and a little bit of know-how, you can easily replace your kitchen mixer tap and have it looking and functioning like new in no time.

Before getting started, it’s important to gather the necessary materials. You’ll need a new kitchen mixer tap, an adjustable wrench, a basin wrench, plumber’s tape, a towel or rag, and a bucket or container to catch any water that may spill during the process. It’s also a good idea to turn off the water supply to your kitchen before starting any work to prevent any accidents or additional water damage.

Once you have all your materials ready, start by removing the old kitchen mixer tap. Begin by turning off the hot and cold water valves located beneath the sink. Use the adjustable wrench and basin wrench to loosen and remove the nuts securing the tap to the sink. Be sure to place the towel or rag beneath the tap to catch any water or debris that may come out during the removal process. Once the nuts are removed, carefully pull out the old tap and set it aside.

How to Replace a Kitchen Mixer Tap: Step-by-Step Guide

Replacing a kitchen mixer tap can be a relatively simple DIY project that can help update the look of your kitchen and improve functionality. Follow these step-by-step instructions to replace your kitchen mixer tap with ease:

Materials You’ll Need:

  • A new kitchen mixer tap
  • Adjustable wrench
  • Plumber’s tape
  • Pliers
  • Bucket or towel

Step 1: Turn Off the Water Supply

Before starting any work, it’s important to turn off the water supply to the kitchen tap. Look for the shut-off valve underneath the sink and turn it clockwise to shut off the water.

New Wave Enviro 10 Stage Plus Water Filter Replacement Cartridge
New Wave Enviro 10 Stage Plus Water Filter Replacement Cartridge
$83.99
$74.15
Amazon.com
Amazon price updated: January 1, 2025 10:26 am

Step 2: Disconnect the Old Tap

Use an adjustable wrench to disconnect the water supply hoses from the old tap. Place a bucket or a towel underneath to catch any water that may spill out. Use pliers to loosen any connections that are difficult to reach.

Step 3: Remove the Old Tap

Once the water supply hoses are disconnected, use a wrench to loosen the nuts securing the old tap to the sink. Once loose, carefully lift the old tap off the sink and set it aside.

Step 4: Prepare the New Tap

Before installing the new tap, wrap some plumber’s tape around the threaded ends of the water supply hoses. This will help create a watertight seal.

Step 5: Install the New Tap

Place the new tap on the sink and align it with the mounting holes. From underneath the sink, thread the nuts onto the tails of the tap and tighten them with a wrench. Make sure the tap is securely attached to the sink.

Step 6: Connect the Water Supply Hoses

Connect the water supply hoses to the corresponding hot and cold water pipes. Use an adjustable wrench to tighten the connections, ensuring they are snug and leak-free. Check for any leaks by turning on the water supply briefly.

New Wave Enviro 10 Stage Plus Water Filter System
New Wave Enviro 10 Stage Plus Water Filter System
$159.99
$103.06
Amazon.com
Amazon price updated: January 1, 2025 10:26 am
See also  How To Change A Kitchen Mixer Tap Australia

Step 7: Test the New Tap

Once all connections are secure, turn on the water supply and test the new tap. Check for any leaks or drips. Make sure both hot and cold water are flowing properly.

Replacing a kitchen mixer tap is a simple project that can make a big difference in your kitchen. By following these step-by-step instructions, you’ll be able to replace your tap and enjoy a fresh, updated look.

Gather the necessary tools

Before you start changing your kitchen mixer tap, it is important to gather all the necessary tools. Having the right tools on hand will make the process easier and more efficient. Here is a list of tools you will need:

Tools
Adjustable wrench
Pipe wrench
Screwdriver (flathead and Phillips)
Bucket
Plumber’s tape
Cloth or sponge
Plumber’s putty

Make sure you have all these tools within reach before you begin. This will save you time and frustration when it comes to removing the old tap and installing the new one.

Turn off the water supply

Before you start changing your kitchen mixer tap, it is important to turn off the water supply. This will prevent any water from flowing out when you remove the old tap and install the new one.

Frizzlife Under Sink Water Filter System with Brushed Nickel Faucet SP99-NEW, NSF/ANSI 42&53 Certified 3-Stage 0.5 Micron Removes Lead, Chlorine, Chloramine, Fluoride, Odor- Quick Change
Frizzlife Under Sink Water Filter System with Brushed Nickel Faucet SP99-NEW, NSF/ANSI 42&53 Certified 3-Stage 0.5 Micron Removes Lead, Chlorine, Chloramine,...
$129.99
$103.99
Amazon.com
Amazon price updated: January 1, 2025 10:26 am

Locate the stop valves under the sink, usually located on the hot and cold water lines. Turn the valves clockwise to shut off the water supply. If there are no individual valves, you may need to turn off the main water supply for your house. This is typically located near the water meter or in the basement.

Once the water supply is turned off, open the tap to release any remaining water pressure. This will help prevent any accidental leaks when you remove the old tap.

Important: It is always a good idea to place a bucket or bowl under the sink to catch any water that may still be in the pipes.

Disconnect the old tap

To disconnect the old kitchen mixer tap, you’ll need to follow these steps:

  1. Turn off the water supply – Find the shut-off valves under the sink and turn them clockwise to stop the water flow. If you don’t have shut-off valves, you will need to turn off the main water supply to the house.
  2. Place a bucket or towel under the sink – This will catch any water that may come out of the pipes during the disconnection process.
  3. Disconnect the supply lines – Use an adjustable wrench to loosen the nuts connecting the supply lines to the old tap. Turn the nuts counterclockwise until they are loose enough to remove by hand.
  4. Remove the mounting nuts – Locate the mounting nuts that hold the tap to the sink. Use a basin wrench or adjustable pliers to loosen and remove these nuts.
  5. Remove the old tap – Lift the old tap out of the sink and place it aside, ensuring any excess water is drained into the bucket or towel.
See also  How To Fix Kitchen Mixer Ttap

Once the old tap is disconnected, you can proceed with installing the new tap.

Classic Kitchen 28 Tea Cup Capacity Hot Water Boiler Urn with New Twisloc˜ Safety Tap , Metal Spout, Stainless Steel Double Wall and Dual Heating Elements Instant Heating and with Reboil
Classic Kitchen 28 Tea Cup Capacity Hot Water Boiler Urn with New Twisloc˜ Safety Tap , Metal Spout, Stainless Steel Double Wall and Dual Heating Elements...
$109.00
Amazon.com
Amazon price updated: January 1, 2025 10:26 am

Prepare the new tap

Before installing the new kitchen mixer tap, it is important to properly prepare it. Follow these steps to ensure a smooth installation process:

Step 1: Gather the necessary tools

Make sure you have all the tools you need to complete the installation. This may include an adjustable wrench, pliers, a basin wrench, screwdrivers, and Teflon tape.

Step 2: Read the instructions

Read the manufacturer’s instructions that came with the new tap carefully. Familiarize yourself with the components and any specific instructions or special considerations for your particular model.

Step 3: Check the fittings and connections

Inspect the fittings and connections of the new tap to ensure they are in good condition. Look for any visible damage or defects. If you notice anything out of the ordinary, contact the manufacturer or return the tap for a replacement.

If your new tap requires additional components or adapters to fit your existing plumbing, make sure you have these items on hand as well.

By following these preparation steps, you will be ready to smoothly proceed with the installation of your new kitchen mixer tap.

Install the new tap

Once you have removed the old tap, you can now proceed with installing the new one. Here is a step-by-step guide on how to install a new kitchen mixer tap:

  1. Start by cleaning the area around the sink where the new tap will be installed. Remove any debris or old sealant using a sponge or cloth.
  2. Take the new tap and position it on the sink. Make sure that the tap’s mounting holes align with the holes on the sink.
  3. Place a rubber washer over each mounting hole of the tap, followed by a metal washer.
  4. Secure the tap in place by tightening the nuts or bolts provided with the tap. Use a wrench to tighten them evenly, but avoid overtightening as it may damage the tap or the sink.
  5. Once the tap is securely attached to the sink, connect the hot and cold water supply lines to the corresponding inlet pipes on the tap. Ensure that they are tightly connected, but again, be cautious not to overtighten.
  6. Turn on the water supply to check for any leaks. If you notice any leaks at the connections, gently tighten them until the leak stops.
  7. Once you have confirmed that there are no leaks, turn on the tap and check if the water flows smoothly. Adjust the mixer handle if necessary.

Congratulations! You have successfully installed your new kitchen mixer tap. Enjoy using your refreshed kitchen feature!

Connect the water supply

Once you have removed the old kitchen mixer tap and have prepared the area, it is time to connect the new tap to the water supply. Follow these steps:

1. Check the water supply

Before connecting the new tap, make sure that the water supply to the kitchen is turned off. This can usually be done at the main water shutoff valve in the house.

See also  How To Fix Kitchen Monobloc Mixer Tap

2. Attach the flexible hoses

Take the flexible hoses that came with the new tap and connect them to the hot and cold water outlets on the wall. Make sure to hand-tighten them securely, but be careful not to overtighten as this could damage the threads.

Note: If the hoses are not included with the tap, you will need to purchase them separately.

3. Connect the hoses to the tap

Next, attach the other ends of the flexible hoses to the corresponding hot and cold water inlets on the bottom of the new tap. Again, hand-tighten them securely without overtightening.

4. Turn on the water supply

Once the hoses are securely connected, slowly turn on the water supply at the main shutoff valve. Check for any leaks around the connections and tighten them if necessary.

Tip: It is a good idea to have a bowl or towel placed under the connections while you turn on the water supply, as this will help catch any potential leaks.

With the water supply connected and no leaks present, you can now move on to the final step of installing the new kitchen mixer tap – testing the water flow and functionality.

Test the new tap

Once the new kitchen mixer tap is securely installed, it is important to test it to ensure that it is working properly. Follow these steps to test the new tap:

  1. Turn on the water supply by opening the shut-off valves under the sink.
  2. Place a bucket or container under the tap to catch any excess water.
  3. Turn on both the hot and cold water handles and check for any leaks.
  4. If there are no leaks, let the water run for a few minutes to flush out any air or debris that may have accumulated during the installation process.
  5. Check the water temperature by adjusting the hot and cold water handles.
  6. Test the water pressure by turning both the hot and cold water on at the same time and checking if the flow is consistent.
  7. Once you have tested the tap and are satisfied with its performance, turn off the water handles and remove the bucket or container.

It is important to test the new tap thoroughly to ensure that it is functioning properly and that there are no leaks or issues with the water flow. If any problems are detected during testing, it may be necessary to make adjustments or seek professional assistance.

FAQ

What tools do I need to change a kitchen mixer tap?

To change a kitchen mixer tap, you will need a wrench, a screwdriver, plumber’s tape, and a new mixer tap.

Can I change a kitchen mixer tap by myself or do I need to hire a professional?

You can change a kitchen mixer tap by yourself if you have some basic plumbing skills. However, if you’re not confident in your abilities, it’s always best to hire a professional to ensure the job is done correctly.

Olivia Carter
Olivia Carter

Olivia Carter is a passionate home cook and kitchen tech enthusiast with over 10 years of experience experimenting with innovative appliances and culinary techniques. She loves exploring how technology can simplify cooking while enhancing creativity in the kitchen. Olivia combines her love for food and gadgets to provide practical advice, honest reviews, and inspiring ideas for home cooks of all levels. When she’s not testing the latest kitchen tools, Olivia enjoys hosting dinner parties, developing recipes, and sharing her culinary adventures with the Tech for Cooking community. Her approachable style and expertise make her a trusted voice in the world of modern cooking.

All tools for you
Logo